Preference; Preference Menu; 4=1. Volume Setup Sub=Menu - Onkyo TX-DS797 Instruction Manual

Preference
4. Preference menu
Advanced Menu
4.Preference
l.Volume Setup
2.Headphones Level
3.0SD Setup
4.0SD Position
_[_IENTERIQuit:ISETUPI
4. P_e {et-enffe
4-1. Volume sub-menu
Setup
This sub-menu allows you to make various settings concerning the
volume control of the TX-DS797.
Advanced Menu
4.Preference
4-l.Volume Setup
a. Volume Display
:Abs01ute_
b.Muting Level
:-00dB_
c.Maximum Volume
:Off
d. Power On Volume
:Last
_ Quit:ISETUP 1
a. Volume Display
You can choose from two ways of displaying the volmne setting on
screen.
Absolute: This displays the volmne with a minimum of rain (0)
for no sound and a maximum of max (100). As a reference, the
volume setting of Ref (82) is used as the 0-decibel for the
relative display method.
Relative: This displays the volume as a decibel value on a scale
with a designated reference point that is displayed as 0, which
equals the volume setting of 82 for the absolute display method.
With this display method, the minimum value is _, the next
highest is -81, and the maximmn value is +18.
b. Muting Level
This sets the attenuation level during playback when the MUTING
button is pressed on the remote controller. This can be set between
-_, -50 and -10 decibels in 10-decibel increments.
c. Maximum Volume
This setting allows you to set the maximum volume that can be
omput with the MASTER VOLUME dial to prevent components
from being damaged by excessively loud volumes. For the absolute
volume display method, this can be set between 50 and 99. For the
relative volmne display method, this can be set between -32 and +17
decibels. To nol set a maximum volume, select "Off."
d. Power On Volume
This sets a designaled volume setting for the TX-DS797 to be set
every time that the power is turned on. This prevents the TX-DS797
from being turned on while it is set 1o an extremely high volmne and
suddenly omput very loud sounds. For the absolute volume display
method, this can be set between rain and max. For the relative
volume display method, this can be set between -_ and +18
decibels. If you do nol mind having the TX-DS797 turned on with its
current volume setting, set this to "Last?'
44