Remote Controller - Onkyo TX-NR696-S Instruction Manual

Remote Controller











Contents
≫
1. ON/STANDBY button

2. Input selector buttons: Switches the input to be played.
3. Play buttons: Used for playback operations for the Music Server ( p63)

or USB device (
button" allows you to operate an HDMI CEC function-enabled AV component.
(Some devices may not be operated.)
4. Q (QUICK MENU) button: Pressing this button during playback allows you to make
settings such as "HDMI" and "Audio" quickly on the TV screen while playing. (
5. Cursor buttons and ENTER button: Select an item with the cursors, and press
ENTER to confirm your selection. Pressing
screen when a music folder list or file list is not displayed on one screen on the TV.
6. button: Displays advanced setting items on the TV or the display to have a

more enjoyable experience with this unit. (
7. TONE button: Adjusts the sound quality. (
8. LISTENING MODE button: Selects a listening mode (
9. DIMMER button: Switches the brightness of the display with three levels. It
cannot be turned off completely.
10. ZONE 2 SHIFT button: Used to control the multi-zone function (
(The ZONE 3 SHIFT button cannot be used with this unit.)

11. SLEEP button: Sets the sleep timer. Select the time from "30 min", "60 min"
and "90 min". (

12. HDMI MAIN/SUB button: Select the HDMI OUT jack to output video signals
from "MAIN", "SUB", and "MAIN+SUB".

13. button: Switches the information on the display and is used to operate RDS
( p77). Also, when the "BLUETOOTH" input selector is selected, pressing
and holding this button for 5 seconds or more will switch to the pairing mode.
14. button: Returns the display to the previous state while setting.

15. button: Temporarily mutes audio. Press the button again to cancel muting.
16. VOLUME buttons

17. CLEAR button: Deletes all characters you have entered when entering text on
the TV screen.

18. MEMORY button: Used to register AM/FM radio stations. (
19. MODE button: Switches between automatic tuning and manual tuning for
AM/FM stations (
component is connected to this unit, you can switch "3. Play buttons" between
"CEC MODE" and "RCV MODE" (normal mode).
16
Connections Playback
≫
p60). Also, switching to "CEC MODE" with "19. MODE
p84)
p73). Also, when an HDMI CEC function-enabled AV
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫
p135)
/ button allows you to switch the
p112)
p83)
p85).
p78).
p75)
≫