僅 Replacing Front Turn Signal Lamp (Bulb Type) - Kia Niro Owner's Manual

Hide thumbs Also See for Niro:
Table of Contents

Advertisement

Maintenance
steer the tyres toward the inside of
the vehicle body.
僅 When replacing the right head -
lamp: operate to the left
僅 When replacing the left headlamp:
operate to the right
2. Turn off vehicle and disconnect the (-)
battery terminal (For plug-in hybrid
vehicle) or battery connector (For
hybrid vehicle).
3. Remove the wheel guard fasteners
using a tool and then remove the
wheel guard.
OSG2H071040
4. Remove the socket from the assembly
(1) by turning the socket counter -
clockwise until the tabs on the socket
align with the slots on the assembly
OSG2H071039
5. Remove the bulb from the socket by
pressing it in and rotating it counter -
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place
7. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise
8. Connect the (-) battery terminal (For
plug-in hybrid vehicle) or battery con -
nector (For hybrid vehicle).
Replacing front turn signal lamp
(Bulb type)
OSG2H071060
Operation
1. Disconnect the (-) battery terminal
(For plug-in hybrid vehicle) or battery
connector (For hybrid vehicle).
2. Remove the socket from the assembly
(1) by turning the socket counter -
clockwise until the tabs on the socket
align with the slots on the assembly.
3. Remove the bulb from the socket by
pressing it in and rotating it counter -
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
4. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
5. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
6. Connect the (-) battery terminal (For
plug-in hybrid vehicle) or battery con -
nector (For hybrid vehicle).
Light bulbs
9
9
61

Advertisement

Table of Contents
loading

Table of Contents