僅 Lcd Display Messages - Kia Niro Owner's Manual

Hybrid system overview
- The service warning light appears
for approximately 3 seconds and
then turns off when all checks have
been performed.
僅 When there is a problem with the
hybrid vehicle control system or hard -
ware.
When the warning light appears whilst
driving, or does not go OFF after starting
the vehicle, we recommend that you
have the vehicle inspected by an autho -
rised Kia dealer/service partner.
EV mode indicator
This indicator appears:
When the vehicle is driven by the electric
motor.
僅 "EV" indicator ON: Vehicle is driven
using the electric motor or the petrol
engine is stopped.
僅 "EV" indicator OFF: Vehicle is driven
using the petrol engine.
Regenerative brake warning light
(red colour)
This warning light appears:
When the regenerative brake does not
operate and the brake does not perform
well. This causes the brake warning light
(red) and regenerative brake warning
light (yellow) to appear simultaneously.
If this occurs, drive safely and have your
vehicle inspected by an authorised Kia
dealer/service partner. The operation of
the brake pedal may be more difficult
than normal and the braking distance
may increase.
(yellow colour)
Driving the hybrid/plug-in hybrid vehicle
Charging cable connection indi -
cator (Plug-in hybrid vehicle)
This indicator appears in red when the
charging cable is connected.
LCD display messages
Ready to drive
OSG2PHQ012036L
A: Ready to start driving
This message is displayed when the
vehicle is ready to be driven.
Check regenerative brakes
OSG2PHQ012037L
A: Check regenerative brakes
This message is displayed when the
brake performance is low or the regen -
erative brake does not work properly
due to a failure in the brake system.
If this occurs, it may take longer for the
brake pedal to operate and the braking
distance may become longer.
1
1 21