Range Extender - VTech vt2431 User Instructions

Your GIGAPHONE has an enhanced feature that is designed to improve
performance. If you are using your GIGAPHONE in an area with excessive
interference, or you require a moderate increase in operating range. the Range
Extender feature can help to improve both the sound quality and range. Actual
range will depend on your environment.
To select the Range Extender setting, follow the procedure listed below:
In the idle(OFF) mode, press
•
MENU and use the scroll keys
to select RANGE EXTENDER,
then press OK.
• There are 3 option settings in the
RANGE EXTENDER menu:
1. Select OFF to disable RANGE
EXTENDER
2. Select ON to enable RANGE
EXTENDER. An "E" icon will
appear in the upper left
corner of the Handset
display, indicating that
RANGE EXTENDER is ON.
3. Select AUTO to allow your GIGAPHONE to automatically monitor the
signal strength between the handset and base unit, and activate
whenever necessary. With this option selected, your GIGAPHONE may
occassionally enable or disable the RANGE EXTENDER feature.
When RANGE EXTENDER is enabled, an "E" icon will appear in the
upper left corner of the Handset display.
• Use the scroll keys to select the desired setting, and then press OK to confirm
the selection.
Note : When Range Extender mode is enabled, your GIGAPHONE will consume
more battery power. That means the standby and talk time of your Handset
will be shorter.
Use this option to register a Handset to the GIGAPHONE Base. You can register
a total of four Handsets to the GIGAPHONE Base. This process is activated
automatically whenever a new handset is powered up in range of the
GIGAPHONE Base.
You will be prompted to enter the 15-digit Base ID code printed on the underside
of the base unit. After entering this code, press OK. The Handset will display
SEARCHING FOR BASE, and then FOUND BASE when the process is
complete.
Note : Base ID codes are 15 digits long and can include the following characters :
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, , or # .
*
19

Range Extender

Register