Mute Function; Hold Function; Flash Function - VTech vt2431 User Instructions

Mute Function

During an active call pressing either the MUTE soft key on the Handset or the
MUTE key on the Base (when in speakerphone mode), will disable the
microphone. Press MUTE key again to return to normal 2-way conversation.

Hold Function

Flash Function

HOW TO ADJUST THE HANDSET VOLUME( also applies to the Handset
Speakerphone)
NOTE: The Handset must be IN USE to adjust the volume
Handset and Base Operation
From the Handset :
• Press the HOLD soft key to place
a call on hold. To return to the
c a l l p r e s s
HANDSFREE key.
From the Base :
• During an active call, press the
HOLD key to place a call on
hold. The SPEAKERPHONE
LED will flash to indicate a call
is on hold.
• To return to the call press either
HOLD or SPEAKERPHONE.
You can use your GIGAPHONE with
services such as Call Waiting. Simply
press the ON key on the Handset or the
FLASH key on the Base (when in
speakerphone mode) to FLASH the line.
1) Press the key directly below VOL on
the Handset display.
2) Use the keys directly below the
symbols on the display to raise
lower the Handset volume. Notice
the change in the display graph as you
adjust the volume. An increase in volume
will be represented by an increase in
shaded area on the graph. A decrease in
volume will result in a reduction of the
shaded area.
3) Press the OK key (top, center) to
confirm your adjustment.
BASE SPEAKERPHONE VOLUME:
During an active call simply press the
Volume UP or DOWN keys to adjust the
speakerphone volume
26
t h e O N o r
/
/
or
.