Table of Contents
Advertisement
Maximum altitude above sea level
Operating ambient temperature
Storage temperature
Max Humidity Level
5 I
NSTALLATION
ALL ELECTRICAL INSTALLATION WORK MUST BE CARRIED
Read the general warnings and safety warnings before installation.
IMPORTANT: Always disconnect the electricity supply from the mains during installation
and maintenance. It is recommended that the fuse is withdrawn, or circuit breaker
switched off at the distribution board while work is in progress (turning off the switch is not
sufficient).
During installation, de-installation and maintenance, ensure working place safety until the
operation is completed.
5.1 Before you start
• Avoid collisions during the handling. Do not deform NEO / NEO WIFI.
• Avoid the contact of cables and of parts of the NEO / NEO WIFI with sharping corners
and do not cause squashing.
• Do not subject the cables to traction. Do not apply concentrated pressures on the NEO
/ NEO WIFI surface.
• Any contact between plastic parts of NEO / NEO WIFI and chemical products or
alcohol (including the water or the mixture water+ glycol inside the tower rail) must be
avoided.
• Check the pack to ensure you have all of the parts listed at paragraph 3 with no visible
signs of damage. Make sure that NEO / NEO WIFI parts are completely dry and have
no defects. If any of the part is missing or appears damaged, you should return the
device to the point of purchase.
• Check that you have the correct size of electric heating element and of NEO / NEO
WIFI for your towel rail. It is essential that the correct sized electric heating element
and NEO are installed in line with the recommendation stated on the packaging or
instruction of your towel rail CERTIFIED BY A EUROPEAN RECOGNISED
APPROVAL INSTITUTE. IF YOU ARE NOT SURE OF THAT, PLEASE REFER TO
– Q
UALIFIED TECHNICIANS ONLY
OUT BY A QUALIFIED ELECTRICIAN
2000m
0°C ÷ 40°C
-20°C ÷ 70°C
RH 85% at 25°C (without
condensation)
Table 2
9
Advertisement
Table of Contents
