Maintenance; Diagnostics; Supplied Accessories, Consumables And Spare Parts - Nexus NEO Manual

8 M
AINTENANCE
Switch off the mains before any installation, de-installation or maintenance operation on
NEO / NEO WIFI.
• During installation, de-installation and maintenance, ensure working place safety until
the operation is completed.
IMPORTANT: Always disconnect the electricity supply from the mains during
installation and maintenance. It is recommended that the fuse is withdrawn or circuit
breaker switched off at the distribution board while work is in progress (turning off the
switch is not sufficient).
• Never try to modify or repair the NEO / NEO WIFI in any of its parts by yourself. Never
try to remove any part of the NEO / NEO WIFI as water can penetrate inside the
regulation box resulting in a risk of electrical shock. Never knock the NEO / NEO WIFI
against anything. Handle with extreme care during every operation and never leave it in
wet areas.
.
9 D
IAGNOSTICS
Description of fault
NEO / NEO WIFI
maximum power level and the towel rail doesn't heat
at all
LEDs are ON but the towel rail doesn't heat
In case of anomalous or strange working condition or
NEO / NEO WIFI
if
10 S
UPPLIED ACCESSORIES
In the event of malfunctioning or damage, the whole NEO / NEO WIFI must be replaced.
No spare parts are available. If the NEO / NEO WIFI regulating box shows some plastic
cracks, please contact the seller for replacement.
regulation mode is selected at
has visible signs of damage
,
CONSUMABLES AND SPARE PARTS
Operations
The product must be replaced,
please contact seller.
 Wait for 2 hours
 If the situation doesn't change,
contact the seller
 Disconnect the
from the mains
 switch off the omnipolar switch
immediately
 send
seller for investigation or
replacement.
29
NEO / NEO WIFI
NEO / NEO WIFI
to the