Storing Pauses In Memory; Using Redial; Storing A Redial Number Into Speed Dial; The Page Feature - VTech t2419 Operating Instructions Manual

Storing Pauses in Memory

• To insert a pause in a phone number,
press PAUSE.
seconds in length. For longer pauses,
press PAUSE two or more times. Each
additional press adds an additional 2
seconds pause.
• If your phone is connected to a PBX
you can store the PBX access number
and a pause before the phone number.
For example, to store 9-PAUSE-555-
1234 in memory location 8 do the
following:
• Press PROG.
• Press 8.
• Press 9.
• Press REDIAL/PAUSE.
• Dial 555-1234.
• Press MEM.

Using Redial

• To redial the last number you called,
press PHONE then press REDIAL.
The phone will automatically dial the
number.
Storing a Redial Number into Speed
Dial
• To store the last number you dialed
as a Speed Dial number, press PROG,
a location number (0-9), REDIAL,
MEM.

The Page Feature

• From the Base Unit, press PAGE to
signal the person at the Handset.
• To end the page at the Base, press
PAGE again.
• To end the page at the Handset, press
OFF.
• If the Handset is in use (off-hook)
when PAGE is pressed on the base
Unit, the Handset will emit one page
alert. If the Handset is not in use (on-
hook), the page alert will continue for
approximately 60 seconds.
• This feature is useful in locating a
misplaced Handset.
Operating Instructions
The pause is 2
12