Table of Contents
Advertisement
OPERATING INSTRUCTIONS
0
TONE
HOLD
PRV
PGM
MEM
1. Press PGM
2. Press the number of the memory
location you wish to store the phone
number in(0-9). The Handset will
beep once.
3. Using the dialpad, dial the number
you want to store. The number can
be up to 16 digits long.
4. Press MEM to store the number into
its assigned memory location.
If programming has been success-
ful, a happy tone will be generated.
If programming was unsuccessful, a
sad tone is generated.
If more than 16 digits are keyed in or
the phone is left unattended in pro-
gram mode for more than 30 sec-
onds, it will generate a sad tone and
automatically exit program mode.
Follow the steps above for each num-
ber you want to store, assigning each
phone number to a different memory
key.
TO SPEED DIAL A STORED NUMBER
You can speed dial from the handset or
OPER
INT.COM
REDIAL
PAUSE
base unit.
1.Press PHONE or SPEAKER-
PHONE to get a dial tone.
2.Press MEM and the number key (0-
9).
INT.COM/LOW BATT
PHONE
FLASH
1
4
GHI
For example, to dial the number you
assigned to key '8', you would press
PHONE, MEM, 8.
TO CHANGE OR REPLACE A
STORED NUMBER
You can change or replace a stored
number just by storing a new number
in its place.
STORING SPECIAL CODES AND
PAUSES
To insert a pause in a phone number,
press REDIAL/PAUSE at the appropri-
ate point when storing the number. This
inserts a 2 second pause. For longer
pauses, press REDIAL/PAUSE two or
more times. Each press makes the
pause 2 seconds longer and is treated
as a stored digit.
If your phone is connected to a PBX
you can store the PBX access number
and a pause before the phone number.
For example, to store 9-PAUSE-555-
21
900
MHz
CORDLESS
OFF
CHAN
2
3
ABC
DEF
5
6
JKL
MNO
Advertisement
Table of Contents
