Rear Fan - HP Z Series Maintenance And Service Manual

4. Disconnect the memory fan cable (4) from the system board.
5. Remove the memory fan.
To install the memory fan, reverse the removal procedure.

Rear fan

To remove the rear fan, use these procedures.
Before removing the rear fan, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
Remove the rear fan:
1. Remove the four Phillips M5.0 × 12.0 screws (1) that secure the rear fan to the computer.
2. Lift the rear fan (2) as far as the rear fan cable allows.
28 Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page 20).
18).