Door Control; Battery Backup - Chamberlain 98032 User Manual

Operation

Door Control

Battery Backup

The battery backup allows access in and out of your garage when the power is out. When the garage door opener is
operating on battery power, the garage door opener will run slower and the lights, Timer-to-Close, and remote close
features (myQ App) are disabled. In battery backup mode, the Automatic Garage Door Lock will unlock when the garage
door is opened, and will remain disabled until power is restored. During a power outage the battery supplies power for
up to 24 hours of operation. For maximum battery life and prevent damage, disconnect the battery when the garage door
opener is unplugged for an extended period of time.
• Solid green LED - Charged battery
• Blinking green LED - Charging battery
• Solid orange LED with beep - Operating on battery power
• Blinking orange LED with beep - Low battery
• Solid red LED with beep - Replace battery
NOTE: Ensure the long antenna is routed down through the small opening in the lower left corner of the battery holder.
Push Bar:
Open/Close garage door.
Navigation Buttons:
Access menu:
Clock Setup, Timer-to-Close, Lock, Program, Temperature,
Language, Light Settings, Contrast Adjust, Maintenance
Alert System, and Wi-Fi Setup.
Motion Sensor
Light Button
Tip: To stop the Smart Control Panel LCD from displaying
"CONNECT myQ APP":
On the Smart Control Panel
PROGRAM and
return to the main screen.
Small Opening
Black wire (-)
Red wire (+)
, press MENU, select
®
, press BACK, then press EXIT to
Battery
Status LED
Antenna
11