Temporary Tone Dialing; Operating Range - VTech ia5824 User Manual

Telephone operaton
Temporary tone dalng
If you have pulse (rotary) dialing, you can change from dial pulse to touch tone dialing during a call
by pressing *TONE. This is useful if you need to send touch tone signals for access to telephone
• Temporary tone dial
banking or long distance services.
mode is useful if you
1. Press TALK/FLASH.
need to send touch
tone signals for
2. Press TONE*.
access to telephone
3. Dial the number.
banking or long
3. When you end the call by pressing OFF, the phone automatically returns to pulse dialing.
distance services.
• For clearer
reception while on Operatng range
a call, press the
This cordless telephone operates within the maximum power allowed by the Federal
CHAN button until
Communications Commission (FCC). Even so, this handset and base can communicate over only a
the interference is
certain distance — which can vary with the locations of the base and handset, the weather, and the
eliminated.
construction of your home or office.
If you receive a call while you are out of range, the handset might not ring or if it does ring, the call
might not connect when you press TALK/FLASH. Move closer to the base, then press TALK/FLASH
to answer the call.
If you move out of range during a phone conversation, you might hear noise or interference. To
improve reception, move closer to the base.
If you move out of range without pressing OFF, your phone will be left off the hook. To hang up
properly, walk back into range, periodically pressing OFF.
 www.vtechphones.com