VTech ia5824 User Manual page 40

Troubleshootng
Problem Suggeston
My cordless handset
• Make sure the power cord is securely plugged into the telephone base. Plug the unit into a different
beeps five times and
is not performing
• Move the cordless handset closer to the telephone base. It may be out of range.
normally • Reset the telephone base by unplugging and removing the battery from the handset. Wait
• Other electronic products can cause interference to your cordless telephone. Try installing
Common cure for • If the unit is not responding normally, try putting the cordless handset in the telephone base.
electronic equipment
• Disconnect the power to the telephone base.
• Disconnect the battery on the cordless handset and the spare battery in the telephone base.
• Wait a few minutes before connecting power to the telephone base.
• Re-install the battery and place the cordless handset into the telephone base or charger.
• Wait for the cordless handset to synchronize its connection with the telephone base. Allow up to
working electrical outlet not controlled by a wall switch.
for 15 seconds then plug in the battery and plug in the power. Allow up to one minute for the
cordless handset and the telephone base to synchronize.
your telephone as far away from these electronic devices as possible: wireless routers, radios,
radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and other cordless telephones
If it does not seem to respond, try the following (in the order listed):
one minute for this to take place.
www.vtechphones.com