Turn The Answering System On Or Off; Call Screening; Call Intercept; Telephone Base Ringer Volume - VTech CS6228-3 User Manual

Answering system operation

Turn the answering system on or off

The answering system must be turned on to answer and record messages.
When the answering system is turned on, the ANS ON/OFF light on the
telephone base will be on and ANS ON will display on the handset.
To turn on or off with the telephone base:
Press ANS ON/OFF to turn the answering system on or
•
off. If the answering system is turned on, it announces,
"Calls will be answered." If the answering system is
turned off, it announces, "Calls will not be answered."
To turn on or off with a handset:
Press MENU/SELECT to show the menu when the
1.
handset is not in use.
Press MENU/SELECT to select > ANS. SYSTEM.
2.
3. Press or
Press MENU/SELECT to select > ANSWER ON/OFF.
4.
5. Press or

Call screening

You can listen at the telephone base to a caller leaving a message. If you
want to turn off the call screening feature, set the telephone base volume to
zero. Remember to raise the volume in order to hear your messages during
playback.

Call intercept

If you want to talk to the person whose message is being recorded, press
/FLASH on the handset.

Telephone base ringer volume

Press VOL or VOL
the telephone is not in use. When you set the ringer volume to zero, the base
ringer is off and the system announces, "Base ringer is off."
See page 8 to set the handset ringer volume.
to select > ANS SYS SETUP, then press MENU/SELECT.
to choose ON or OFF, then press MENU/SELECT.
on the telephone base to adjust the ringer volume when
30