Compaq Evo Notebook N1000 Series Maintenance And Service Manual page 181

3-Conductor Power Cord Set Requirements (Continued)
Country
United Kingdom
United States
Notes
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm 2
conductor size. The power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation in
the country where they will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a NEMA
5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm 2 conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
Maintenance and Service Guide
Accredited Agency
BSI
UL
Power Cord Set Requirements
Applicable Note Number
1
2
B–3