Compaq Evo Notebook N1000 Series Maintenance And Service Manual page 118

Removal and Replacement Procedures
6. Remove the display video cable 1 from the routing channel
in the heat spreader (Figure 5-21).
7. Lift the right side of the heat spreader until it rests at
an angle 2 .
8. Slide the heat spreader to the right at an angle 3 and remove
the heat spreader from the base enclosure.
Figure 5-21. Removing the Heat Spreader
Reverse the preceding procedures to install the heat spreader.
5–26 Maintenance and Service Guide