Compaq Evo Notebook N1000 Series Maintenance And Service Manual page 152

Removal and Replacement Procedures
2. Turn the system board bottom side up with the rear panel
facing forward.
3. Remove the PM2.0 × 4.5 screw 1 that secures the modem
ground cable to the system board (Figure 5-46).
4. Disconnect the modem cable 2 from the system board.
5. Remove the cable from the clips 3 on the system board.
Figure 5-46. Removing the Modem Cable
Reverse the preceding procedures to install the modem cable.
5–60 Maintenance and Service Guide