Controls And Functions Of The Remote Control - VocoPro CDG-600RF Owner's Manual

Controls and Functions of The Remote Control

USING THE REMOTE CONTROL
The CDG-600RF comes with a handy remote control to allow the user to operate the Karaoke functions from up to
twenty-five feet from the unit. The remote control offers the user fast forward, rewind, skip, search, programmable
memory, play/pause, open/close for the CD/ CDG tray and stop. The memory function can be used with the
remote control to program specific song selections when using the CD/CDG player. The remote control will not
work with the tape deck. Be sure not to block the infrared eye on the CDG-600RF (See #15 FRONT PANEL
diagram) or the sensor on the hand held remote control (#1 REMOTE CONTROL diagram). If either of these parts
is covered while attempting to use the remote control, it will not function. (Also, see PARTS AND FUNCTIONS,
FRONT PANEL, #8 for detailed instructions about programming the CDG-600RF). All the parts on the remote
control correspond to the same parts on the front panel of the CDG-600RF.
BATTERY COMPARTMENT: On the back of the hand held remote control there is a cover that slides off to
expose the battery compartment. Push cover down with thumb and slide off. The hand held remote control uses
two "AAA" size batteries.
INFRARED REMOTE SENSOR: The sensor on the top of the hand held remote control communicates with the
infrared sensor on the front panel of the CDG-600RF and should not be covered or the remote control will not
work properly.
Avoid dust
12