Usign Effects And Change The Key; Using Effects And Changing The Key; Using The Cassette Deck - VocoPro CDG-600RF Owner's Manual

Using Effects and Changing the Key

CHANGING THE KEY OF THE MUSIC
Sometimes a singer would like to sing a particular song but will find it may not be written within a key or range
comfortable for them. In this case you can raise or lower the pitch or key of the music to make it easier to sing.
The key controller works for both CD/CDG and cassette audio signals.
NOTE: When raising or lowering the key of the music the tempo will remain the same.
1. First, locate the KEY CONTROL buttons on the front of the CDG-600RF player. There are three buttons under
which are the words KEY CONTROL. There is a button for each of the following three functions:
a. Sharp - Used to raise the pitch or key of the music.
b. Natural - Used to return the music to it's "natural" or "original" pitch or key.
c. Flat - Used to lower the pitch or key of the music.
RAISING OR LOWERING THE PITCH (OR KEY) OF THE MUSIC
1. To raise the pitch or key of the music, press the SHARP (#) button once for each 1/2 step you would like the
music raised.
2. To lower the pitch or key of the music, press the FLAT (b) button once for each 1/2 step you would like the
music
lowered.
3. To return the music to its "natural" or "original" key, simply press the NATURAL button once.
NOTE: The digital display will show how many half steps a song is raised or lowered by indicating a (+) or (-)
before a number to indicate raised or lowered values. It will display (+0) if the current song selection is being
played in the natural key.

Using the Cassette Deck

CASSETTE DECK PLAYBACK
1. Locate the CASSETTE button under the CD tray on the front of the unit and press to make the cassette deck
the active channel.
2. Locate the ST/EJ button on the front panel of the cassette deck and press to open cassette door.
4. Insert a cassette tape with the side you want to play facing you and carefully close the cassette door, never
force.
5. To rewind the cassette press the REW button until the tape rewinds to the desired location.
6. To advance the cassette press the F-FWD button until the tape advances to the desired location.
7. To stop either function, press the "STOP" button. This will stop advancing, rewinding or playing the cassette
tape.
8. To play the desired track press the "PLAY" button.
9