Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VP505XVT User Manual

®
VIZIO VP505XVT1A User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Panel

POWER 'VIZIO' LIGHT– The VIZIO name lights white
when powered on and orange when in the Standby mode.
REMOTE CONTROL SENSOR – This is the window
through which the remote control signals pass to the
sensor. Point the remote control directly at this window for
the best response to the remote signal.

1.2 Side Panel Controls

) – Switch the VP505XVT1A on by pressing the button once.
POWER (
Press the button again to turn the VP505XVT1A off.
MENU – This button activates the On Screen Display (OSD) menu.
CH + / - – Use these buttons to step the TV channels
up or down. While the OSD is active, these buttons
function as up and down controls in the OSD menus.
VOL + / - – Use these buttons to increase or
decrease the speaker volume. While the OSD is
active, these buttons function as left and right
controls in the OSD menus.
INPUT (ENTER) – Pressing this button will display
the input options, then using the CH+ or CH- will
allow you to navigate through the input sources: TV,
AV (S-Video), AV (Composite), Component, RGB,
HDMI 1, HDMI 2, HDMI 3 and HDMI 4. Additionally,
when the OSD is active, this button confirms the
menu function to be adjusted.
Version 8/21/2008 9
www.VIZIO.com