Vizio VP505XVT User Manual page 14

When CABLE is selected and the code to match your Cable Box has been entered, this button
will operate the Cable Box the same as this button on your Cable Remote. In TV mode, this
button is used for the PIP/POP feature.
When CABLE is selected and the code to match your Cable Box has
been entered, this button will operate the Cable Box the same as this
button on your Cable Remote. In PIP mode, pressing this button once will
display the next size of the sub-screen.
When CABLE is selected and the code to match your Cable Box has
been entered, this button will operate the Cable Box the same as this
button on your Cable Remote. If you have a Satellite Box and the code
to match your Satellite Box has been entered, this button will operate the
Satellite Box the same as this button on your Satellite Remote. Using this
button in the PIP feature will show the sources to be used as inputs for the
second signal.
When CABLE is selected and the code to match your Cable Box has
been entered, this button will operate the Cable Box the same as this
button on your Cable Remote. If you have a Satellite Box instead and
the code to match your Satellite Box has been entered, this button will operate
the Satellite Box the same as this button on your Satellite Remote. If the sub-
screen input of the PIP feature is antenna or cable (no box) service, pressing
this button will change the channel in the sub-screen.
Press this button to select TV programming.
Pressing this button will select between AV (S-Video) and AV
(Composite) inputs.
Pressing of this button will select Component input.
Repeated pressing of this button will switch between HDMI 1, HDMI
2, HDMI 3 and HDMI 4 inputs.
This button cycles through the available screen formats. The options
are Standard, Full Screen, Crop and Panoramic.
mode the options are 4:3 and 16:9.
when using the remote to control your Cable/Satellite Box or VCR.
This button allows the user to select the sleep options by adjusting the timer in 30 minute
increments up to 120 minutes. This button also pauses playback when using the remote to control
your Cable/Satellite Box or VCR.
This button will select the MTS options of Stereo, SAP or Mono in standard TV mode and alternate
audio channels, where available, in DTV mode. This button also starts Playback when using the
remote to control your Cable/Satellite Box or VCR.
This button will select the Closed Caption mode. The options are OFF, CC1, CC2, CC3, and CC4.
If Digital Cable Service is the signal, the options are Service1 through Service6, depending on your
local company. This button also Stops playback/recording when using the remote to control your
Cable/Satellite Box or VCR.
Press this button to change the picture mode from these options: Standard, Movie, Game, Sports
and Custom.
Press this button to "Freeze-Frame" the current screen. Press this button again to continue
playing. This button also skips to the previous chapter when using the remote to control your
Cable/Satellite Box or DVD Player.
Press this button to switch the audio from the main screen to the sub-screen while in PIP or POP
mode.
While in PIP/POP mode; pressing SWAP will switch the displays from the main screen to the sub-
screen or vice versa.
Version 8/21/2008
Note: in RGB/PC
This button also starts recording
14
www.VIZIO.com
®
VIZIO VP505XVT1A User Manual