Vizio VP505XVT User Manual page 33

b. The Tuner screen will be displayed. The
default choice is Antenna. If you are
using Direct Cable (No Box) Service,
press the ▼ button on the remote control
to highlight CABLE.
Press the ► button on the remote to go
to the next screen.
c. The Channel Scan screen will be displayed.
The default choice is Scan.
Press the ► button on the remote control
to commence the search for available
channels to be stored into memory.
If you do not want to scan for channels at
this time, press the ▼ button on the remote
to highlight Skip Scan and then press the
► button.
Note: If you select Skip Scan, next time that you decide to complete this procedure, you will need to
select the TV as input (through the Input key) and then go through the Menu option to select the Tuner
setup to get the option of scanning the channels again.
d. The screen will now change to show the
progress of the search for Analog (NTSC)
and Digital (ATSC) channels.
Note: DTV digital broadcast is not available in all areas. Refer to
about availability in your area, type of antenna and in which direction to point your antenna. The channel
availability through cable depends upon which channels your cable operator supplies in Clear QAM.
Consult your cable operator for more information.
Version 8/21/2008 33
www.VIZIO.com
®
VIZIO VP505XVT1A User Manual
www.antennaweb.org for information