Optical Output Of Audio Received - Vizio VP505XVT User Manual

2.6.1 Optical Output of Audio received

If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VP505XVT1A.
1. Turn off the power to the PLASMA FHDTV and Receiver/Amp.
2. Using a SPDIF cable, connect the cable
to the audio input connector on the
Receiver/Amp and connect the other end
to the OPTICAL OUT (white area) audio
connectors at the rear of the PLASMA
FHDTV.
3. Turn on the power to the PLASMA
FHDTV and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5. Press either ◄ or ► on the remote
control to select the Audio Adjust menu.
Press either ▼or▲ on the remote control
6.
to select SPEAKERS.
7. Press either◄ or ► on the remote
control to select option.
8. Press either ▼ or ▲to highlight the option OFF.
9. Press the OK key to accept the choice.
10. Press the EXIT key to go back to view the programming.
11. The sound (Audio) from the TV will now be routed through your Receiver/Amp stereo
system.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.
Version 8/21/2008 29
www.VIZIO.com
®
VIZIO VP505XVT1A User Manual