Table of Contents
Advertisement
®
VIZIO
VO47L FHDTV30A User Manual
Chapter 1 Basic Controls and Connections
Front Bezel
POWER 'VIZIO' LIGHT– The VIZIO name lights white
when powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to the
sensor. Point the remote control directly at this window for
the best response to the remote signal.
Right Side Panel Controls
POWER (
) – Switch the VO47L FHDTV30A on by pressing the button once. Press the button again
to turn the VO47L FHDTV30A off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will return to the previous menu level.
CHANNEL +/- – Use these buttons to step up or down the TV channels. While
the OSD is active, these buttons function as up and down controls in the OSD
menus.
VOLUME +/- – Use these buttons to increase or decrease to the speaker
volume.
While the OSD is active, these buttons function as left and right
controls in the OSD menus.
INPUT (ENTER) – Repeated pressing of this buttons steps through the input
sources in the following sequence: TV, AV1(S-
Video), AV2, Component 1, Component 2, RGB,
HDMI1, HDMI2, HDMI3 and HDMI4. Once you
have stepped through the entire sequence, you will
return to the beginning.
Additionally, when the OSD is active, this button
confirms the menu function to be adjusted. When
the OSD is not active, pressing this button will
display the current input mode.
Version 11/20/2008
9
www.VIZIO.com
Advertisement
Table of Contents
