Connecting A Pc (Computer) - Vizio VP505XVT User Manual

2.7 Connecting a PC (Computer)

1. Turn off the power to the FHDTV and PC (Computer).
2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your PC and the other end
to the RGB PC input (blue area) at the rear of the FHDTV.
3. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the
rear of the FHDTV.
4. Turn on the FHDTV and PC Computer.
5. Select RGB using the INPUT button on the remote or side of the FHDTV.
Note:
a) For the best picture quality when connecting a pc computer through RGB
PC, set your pc computer timing mode to VESA 1920x1080 at 60Hz.
Please refer to the pc or graphic card's user guide for additional
information on how to set the timing mode and the video output
requirements of the product.
b) A RGB (VGA) cable and stereo mini jack cable are not included and can
be purchased at an electronics store.
c) If connecting a Laptop, please refer to the operating instructions for the
device to enable the external display (the FHDTV).
Version 8/21/2008 30
www.VIZIO.com
®
VIZIO VP505XVT1A User Manual