Connecting A Pc Computer - Vizio VW32L HDTV20A User Manual

Table of Contents

2.8 Connecting a PC Computer

connection will require an 1/8" stereo mini plug at the end which goes into the TV) input (blue

area) at the rear of the High Definition TV.

Turn on the HDTV and PC Computer.

Select RGB using the INPUT button on the remote or side of the High Definition TV.

Note:

For the best picture quality when connecting a pc computer through RGB PC, set your pc

computer timing mode to VESA 1366 x 768 at 60Hz. Please refer to the pc or graphic

card's user guide for additional information on how to set the timing mode and the video

output requirements of the product.

A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at

an electronics store.

Version 9/17/2007

www.VIZIO.com

VIZIO VW32L HDTV20A User Manual

Turn off the power to the High

Definition TV and PC Computer.

Connect a 15-pin D-Sub RGB

(VGA) cable to the RGB output of

your pc computer and the other end

to the RGB PC input (blue area) at

the rear of the High Definition TV.

Connect the Audio Out on your pc

computer to the RGB PC Audio (this

Table of Contents