Connecting An External Receiver/Amp; Optical Output Of Audio Received - Vizio VO22LF User Manual

2.7 Connecting an external Receiver/Amp

2.7.1 Optical Output of Audio received

If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VO22L FHDTV10A.
1. Turn off the power to the LCD HDTV and Receiver/Amp.
2. Using an SPDIF cable, connect the cable to the audio input connector
on the Receiver/Amp and connect the other end to the OPTICAL OUT
(white area) audio connectors at the rear of the LCD HDTV.
3. Turn on the power to the LCD HDTV
and Receiver/Amp.
4. Then press the
remote control to open the On-
Screen Display (OSD) menu.
5. Press the
select the Audio Adjust menu.
6. Press the
select SPEAKERS.
7. Press the
select OFF so that the sound from
the LCD HDTV will now be routed
through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.
Version 9/9/2008
button on the
on the remote control to
on the remote control to
on the remote control to
www.VIZIO.com
VIZIO VO22L FHDTV10A User Manual
28