Failure Display And Inspection; Technical Specification - Hoover HI642CBB Instruction Manual

Failure Display and Inspection

If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Problem Possible causes
E4/E5 Temperature sensor failure
E7/E8
Temperature sensor of the
IGBT failure.
E2/E3 Abnormal supply voltage
E6/E9 Bad induction hob heat
radiation
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction hob.

Technical Specification

Induction Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size D×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products
we may change specifications and designs without prior notice.
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether power supply
is normal. Power on after the power
supply is normal.
Please restart after the induction hob
cools down.
HI642CBB/HI642BCB
4 Zones
220-240V~ 50/60Hz
7200W
590×520×58
560×490
22