Table of Contents
Advertisement
34
Cleaning the Combustor
Your combustor is available through an authorized Travis dealer. You can visually check the condition of
your combustor by opening the door and looking above the baffle with a flashlight. If there is visible ash
accumulation on the surface of your combustor it should be cleaned off with a soft bristled brush. If there
is visible creosote buildup (tar substance) on the combustor, burn your stove on high and the creosote
should burn off. If the creosote does not burn off your combustor needs to be replaced. If the stove emits
excessive smoke on medium and high burns your combustor may need replacement.
NOTE: Use an ash vacuum with brush attachment to clean the combustor.
1. With the stove fully cooled, insert the ash vacuum nozzle into the area directly above the door
opening.
2. Carefully place the brush surface of the nozzle over the combustor openings and remove any ash or
debris. Take care to prevent damage to the combustor (the surface is fragile).
© Travis Industries
Maintaining Your Appliance
2/13/2024 -1593
Rockport NGH
Advertisement
Table of Contents
