Mobile Home (Us) Or Transportable Building (Can) Requirements - Travis Industries Lopi Rockport NexGen-Hybrid Owner's Manual

Table of Contents

Advertisement

14

Mobile Home (US) or Transportable Building (CAN) Requirements

Outside air must be installed - see "Outside Air Requirements" on page 12.
The Chimney connector and chimney must be one of the following types:
AMERI-TEC model DCC with model HS chimney
DURAVENT model DVL with DURATEC or DURA-PLUS chimney
GSW Super Chimney Twenty-One connected directly to appliance
I.C.C. Excel (2100-2 Can.) (103-HT USA) chimney with ULTRABlack connector
METALFAB model DW connector with TG chimney
OLIVER MACLEOD PROVENT model PV connector with model 3103 chimney
SECURITY model DP or DL connector with SECURITY model ASHT or S2100 chimney
SELKIRK METALBESTOS model DS connector with model SSII chimney
Standard Masonry Chimney with any one of the above listed connectors
NOTE: Reduced clearance connectors may not connect to the flue collar – an appliance adapter may be required.
Stove placement must maintain the following clearances to combustibles (drywall, furniture, etc.).
If using offsets, use the connector clearance shown to the right, not
the connector manufacturer's clearance.
The appliance must be secured to the floor (consult your building
official). Secure the outside air boot to the floor and stove to
ensure the stove does not dislocate.
Mobile Home (US) or Transportable Building (CAN) installations
require a spark arrester at the chimney termination.
Continuity of airtightness at the location where the chimney or other
component penetrates the air barrier system must be maintained.
The appliance must be grounded to the chassis of the mobile home
(US) or transportable building (CAN) (consult your building official).
WARNING: DO NOT INSTALL IN A SLEEPING ROOM.
CAUTION: THE STRUCTURAL INTEGRITY OF THE MOBILE HOME
OR TRANSPORTABLE BUILDING FLOOR, WALL, AND
CEILING/ROOF MUST BE MAINTAINED.
© Travis Industries
Stove Installation
(for qualified installers only)
2/13/2024 -1593
12" Min.
Connector Clearance
(as outlined above)
Stove Clearance
(as outlined above)
IDB1166
Rockport NGH

Advertisement

Table of Contents
loading

Table of Contents