Assembly; Lifting & Placing - Grizzly EXTREME Series Owner's Manual

Assembly

The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble machine:
Attach dust port with (6)
1.
and ⁄ " flat washers (see Figure 12).
5
16
Dust Port
Figure 12. Dust port installed.
-16-
⁄ "-18 x ⁄ " hex bolts
5 3
16 4
x 6
Lifting & Placing
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
Use a forklift and an assistant to lift the dust col-
lector into place and adjust the leveling feet.
To lift and place machine:
Lift machine by using forklift slots or eye bolts
1.
(see Figure 13), and set in desired location.
With assistant's help, raise or lower adjust-
2.
able feet as needed to stabilize machine (see
Figure 13).
Eye Bolt
(1 of 4)
Adjustable
Foot
(1 of 4)
Figure 13. Lifting points and adjustable feet.
Model G0966 (Mfd. Since 04/23)
HEAVY LIFT!
Forklift Slot
(1 of 2)