Section 3: Setup; Needed For Setup; Unpacking; Inventory - Grizzly EXTREME Series Owner's Manual

This
serious
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.

Needed for Setup

The following items are needed, but not included,
for the setup/assembly of this machine.
Description
• Additional People ....................... As Needed
• Safety Glasses (for each person) ............... 1
• Wrench Open-Ends 17mm ......................... 1
• Wrench or Socket 12mm ............................ 1
• Lifting Straps (Rated for at least 830 lbs.) .. 4
• Lifting Equipment
(Rated for at least 830 lbs.) ........................ 1
• Air Compressor (90 PSI) ............................ 1
• Air Hose
with ⁄ " Industrial Quick-Connect Coupler ... 1
1
4
-14-

SECTION 3: SETUP

machine presents
injury hazards
HEAVY LIFT!
Qty

Unpacking

This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 (Figure 10)
A. G0966 Metal Dust Collector (Not Shown) .. 1
B. Dust Port 6" ................................................ 1
C. Hex Bolts ⁄ "-18 x
5
16
D. Flat Washers ⁄ "........................................ 6
5
16
B
Figure 10. Inventory
Model G0966 (Mfd. Since 04/23)
Qty
⁄ " ................................ 6
3
4
C
D