Table of Contents
Advertisement
Quick Links
85205 Rev. J
HALO BIG BLOCK
SRL- LE
Parts: 10924, 10927, 10928
Instruction Manual
Do not throw instructions away.
Read and understand instructions before
using this equipment.
2 Introduction
2 Product Specific Applications
2 Applicable Safety Standards
2 For All Product Applications
2 Worker Classifications
3 Compatibility
3 Limitations
3 Maintenance, Cleaning, and Storage
3 Installation and Use
5 Product Specifications & Materials
6 Safety Information
7 Labels
8 Diagrams
9 Inspection
10 Inspection Log
Advertisement
Table of Contents
Related Manuals for Guardian HALO BIG BLOCK SRL-LE
Summary of Contents for Guardian HALO BIG BLOCK SRL-LE
- Page 1 85205 Rev. J HALO BIG BLOCK SRL- LE Parts: 10924, 10927, 10928 Instruction Manual 2 Introduction 2 Product Specific Applications 2 Applicable Safety Standards 2 For All Product Applications 2 Worker Classifications 3 Compatibility 3 Limitations 3 Maintenance, Cleaning, and Storage 3 Installation and Use 5 Product Specifications &...
-
Page 2: Product Specific Applications
Introduction Applicable Safety Standards Thank you for purchasing a Guardian Fall Meets or exceeds: Protection Halo SRL-LE. This manual must OSHA 1910.140 be read and understood in its entirety, and used as part of an employee training program OSHA 1926.502 ... -
Page 3: Maintenance, Cleaning, And Storage
Guardian to inquire about its return or repair. unintentionally open and release. Cleaning after use is important for maintaining the safety and longevity of Halo SRL-LE. -
Page 4: Installation And Use
Setback distance: As determined by product LE applications, snap hook end must be testing, Guardian Fall Protection Halo SRL- connected to harness dorsal D-ring. Shock LEs are not required to be setback any specific distance from the leading edge of absorber component much always be located applicable fall hazard(s). -
Page 5: Specifications
Specifications Swivel Top Connection Point User weight range (including all clothing, tools, and equipment): OSHA (LE): 100 - 310 lb (45 - 141 kg) OSHA (Non-LE): 100 - 420 lb (45 - 191 kg) Maximum Arrest Force: 1,800 lb (8 kN) ... -
Page 6: Safety Information
Safety Information See Diagram B on page 8. A pre-planned rescue procedure in the case WARNING! Failure to understand and of a fall is required. The rescue plan must be comply with safety regulations may result in serious injury or death. Regulations project-specific. - Page 7 #000000 #FCB414 #FFFFFF PANTONE® Process Black PANTONE® 7549 White C0 M0 Y0 K0 C0 M32 Y100 K0 C0 M0 Y0 K0 GUARDIAN R0 G0 B0 R253 G181 B21 R255 G250 B250 #000000 #FCB414 #FFFFFF HALO Label Stock: MacTac REBEL 4MIL MATTE PVC HT PRINT RB528H Laminate: Self-Retracting Lifeline OSHA 1926.502 &...
- Page 8 Diagram A - Fall Clearance Diagram B - Connections 3 ft 6 in 5 ft (1,5 m) (1,07 m) Diagram C - Permitted Lifeline Redirection Angle Swing Fall ≥900 Free Fall �� Deceleration Swing Fall ��...
- Page 9 Inspection Prior to EACH use, inspect SRL for deficiencies, including, limited corrosion, deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint build-up, excessive heating, alteration, broken stitching, fraying, and missing or illegible labels. IMMEDIATELY remove SRL from service if defects or damage are found, or if exposed to forces of fall arrest.
-
Page 10: Inspection Log
Inspection Log Serial No: Date of first issue: Model #: User: Date: Results/Condition: Inspected by: Next Inspection Date:... - Page 11 Notes...
- Page 12 This warranty is not transferable to any other Guardian service and does not apply to product that is resold after having been put into service. No other person, firm, entity, or the like is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian’s products.