Related Manuals for Guardian Diablo SRL-LE
Summary of Contents for Guardian Diablo SRL-LE
-
Page 1: Table Of Contents
Product Name: Diablo 2.5 Cable Tie-Back SRL-LE Part #: 11108; 11109 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards Worker Classifications Product Specific Applications Limitations 2 - 3 Components and Specifications Installation and Use 4 - 6... -
Page 2: Introduction
Introduction Thank you for purchasing a Guardian Fall Protection Diablo 2.5 Cable Tie-Back SRL-LE. User Information This manual must be read and understood in its entirety, and used as part of an employee training program as required by Date of First Use: OSHA or any applicable state agency. -
Page 3: Product Specific Applications
Product Specific Applications Use of equipment in unintended applications may result in serious WARNING injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Diablo 2.5 Cable Tie-Back SRL-LEs may be used in Personal Fall Arrest applications as a component of a MAXIMUM 1 Personal Fall Arrest System (PFAS). Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs. -
Page 4: Components And Specifications
Compatibility: When making connections with Diablo 2.5 Cable Tie-Back SRL-LE, eliminate all possibility of roll-out. Roll-out occurs when interference between a hook and the attachment point causes the hook gate to unintentionally open and release. All connections must be selected and deemed compatible with Diablo Cable Tie-Back SRL-LE by a Competent Person. -
Page 5: Installation And Use
Installation and Use 1. All PFAS components must be selected and deemed compatible with Diablo 2.5 Cable Tie-Back SRL-LE by Competent Person. 2. Ensure structure to which Diablo 2.5 Cable Tie-Back SRL-LE is to be attached, and on which work is to be performed, is free of all hazards, including, but not limited to, debris, rot, rust, sharp or abrasive edges and surfaces, and hazardous materials. - Page 6 Red indicator visible - DO NOT use. SRL Bracket installed at web loop. 3. Secure Diablo SRL-LE back pad around harness shoulder straps with provided hook and loop fastener straps as shown. Diablo SRL-LE back pad hook and loop fastener straps...
- Page 7 Tie-Back: A) Attach Diablo 2.5 Cable Tie-Back SRL-LE to harness. Snap hook attached to NEVER attach snap tie-back webbing. hook to cable lifeline. B) Wrap Diablo 2.5 Cable Tie-Back SRL-LE tie-back webbing around selected structural anchor. Ensure potential free fall does not exceed what is permitted by the system, as determined by Competent Person.
-
Page 8: Maintenance, Cleaning, And Storage
Setback distance: As determined by product testing, Guardian Fall Protection Diablo 2.5 Cable Tie-Back SRL-LEs are not required to be setback any specific distance from the leading edge of applicable fall hazard(s). Diablo 2.5 Cable Tie-Back SRL-LE may be used in combination with horizontal lifelines. All installation, set-up, and use of horizontal lifelines must be done under the supervision of a Qualified Person. -
Page 9: Inspection
Inspection Prior to EACH use, inspect Diablo 2.5 Cable Tie-Back SRL-LE for deficiencies, including, but not limited to, corrosion, deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, broken stitching, fraying, bird-caging, and missing or illegible labels. Pay careful attention to cable swage (located beneath rubber stopper) and ensure no damage is present at location where swage contacts lifeline. -
Page 10: Inspection Log
Inspection Log Date of First Use: __________________. Product lifetime is indefinite, as long as it passes pre-use and Competent Person inspections. User must inspect prior to EACH use. Competent Person other than user must complete formal inspection at least every 12 months. Competent Person to inspect and initial. This inspection log must be specific to one Diablo 2.5 Cable Tie-Back SRL-LE. -
Page 11: Safety Information
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. -
Page 12: Labels
Labels OSHA 1910, & OSHA 1926 Subpart M rated to 0.005” radius edge STEEL SH MOUSQUETON EN ACIER /GANCHO DE SEGURIDAD DE ACERO 11108 Serial # Lot # Mfg. Date # de Série # de lote Fecha de Fabricación # de Série # de lot Date de Fabrication WARNING:...