Configuring Data Logging Using Ion Setup; Waveform Recording - Siemens US2:9810T24V User Manual

9810 series - User manual
Data recorder
V2 Hrm 17-32 (Data Rec 48)
V2 Hrm 33-48 (Data Rec 54)
V3 Hrm 1-16 (Data Rec 43)
V3 Hrm 17-32 (Data Rec 49)
V3 Hrm 33-48 (Data Rec 55)

Configuring data logging using ION Setup

Use ION Setup to configure the meter's data recorders.
Changing the meter's data recorder configuration clears existing data in that data recorder.
DATA LOSS
Failure to follow these instructions can result in data loss.
Ensure that all important data is recorded before configuring data recording.
To configure data logging using ION Setup:
1. Start ION Setup.
2. Open the Setup Assistant for your meter.
3. Click Logging > Memory.
4. In the Status tab, select the data log and click Edit.
The Log Depth Setup window appears.
5. Configure the settings as applicable:

Waveform recording

The meter's factory-configured waveform recorders store waveform data related to power quality
events.
7EN05-0390-08
Parameter
Log Interval
Log Depth
Log Memory
Log Storage
Description
V2 voltage harmonics - 10 min
V2 voltage harmonics - 10 min
V3 voltage harmonics - 10 min
V3 voltage harmonics - 10 min
V3 voltage harmonics - 10 min
NOTICE
Description
How frequently records are logged
Maximum number of records stored in the log
Information only. This is automatically calculated, and displays
how much memory the log uses based on the Log Interval
and Log Depth
Information only. This is automatically calculated, and displays
how much total memory is left after subtracting the Log
Memory usage
Logging
226