Table of Contents
Advertisement
3. Remove screws securing top mount to frame using a Phillips screwdriver.
4. Slide back panel upward and remove.
5. Remove set screws securing belt to belt clamp using a 7/32" Allen wrench.
Remove weight plates
1. Turn the increment weight adjusting knob to select 0 lbs (0 kg).
2. Remove top guide rod caps. Top guide rod cap contains a compression spring that will fly if grasp is not released slowly. Slide
spring loaded top guide rod cap down guide rod until cap is clear of frame. Slowly release grasp of top guide rod cap and set
aside.
3. Repeat above step for opposite guide rod.
Item
1
2
3
Item
1
2
Item
1
2
3
Page 11 of 24
Description
Screw
Top mount
Back panel
Description
Belt clamp
Set screw
Description
Top guide rod cap
Guide rod
Guide rod plate
Qty
6
1
1
Qty
1
2
Qty
2
2
1
Advertisement
Table of Contents
