Machine Parameters And Performance - Philips Saeco XSmall Service Manual

XSMALL
2.1. Technical specifications
Power supply and output:
Temperature monitoring:
Safety system:
Coffee heat exchanger output:
Stainless steel
Gear motor:
Pump:
Overpressure valve:
Water filter:
Coffee grinder:
Hot water/steam valve
Automatic dosage
Power consumption:
Dimensions: W x H x D in mm:
Weight:
Water tank capacity:
Coffee container capacity
Coffee dreg drawer capacity
Heat exchanger capacity:
Water circuit filling time:
Heating time:
Dispensing temperature:
Grinding time:
2.2.

Machine parameters and performance

AMOUNT
OF PRODUCT
Espresso *
Medium coffee
Large coffee
Pre-ground
Hot water
Steam for frother
* No XSmall Puro
230 V~ 50/60 Hz 1500 W - 120 V~ 60 Hz 1500 W - 100 V~
50/60 Hz 1300 W
Variable resistor sensor (NTC) - transmits the value to the
electronic P.C.B.
2 manual reset or one-shot thermostats (175°C)
(230/120 V~) 1300 W - (100 V~) 1100 W
for coffee, hot water and steam dispensing
33VC with 2 rotation directions; power supply 24VC
Ulka with reciprocating piston and 100°C cutout 48 W, 230 V,
50 Hz, Type EP5 approx. 13-15 bar 120 V, 60 Hz
50/60 Hz
Opens at approx. 16-18 bar
In tank
Direct current motor with flat ceramic grinders
Presblock
Dose adjustment controlled by the electronic system
During the heating phase - approx. 5.6 A
295x325x420 (data may vary depending on the model)
6.9 kg
1.0 litres
185 g coffee beans
08
Approx. 10 cc
Approx. 15 seconds for first filling cycle
Approx. 45 seconds
Approx. 84 ± 4°C
Approx. 8-10 seconds
Mini-
Default
mum
amount
amount
(Puls.)
(Puls.)
70 165
No No
70 440
Continues until the water supply has been exhausted (fill circuit status)
Continues until the water supply has been exhausted (fill circuit status)
02 TECHNICAL SPECIFICATIONS
Maximum
Programm.
amount
by the user
(Puls.)
600 Yes
No
600 Yes
No
Programm.
by Produc-
tion/Service
department
No
No No
No
100 V,
01/05