XSMALL
3.1.
Customer menu XSmall 3 led
Indications
Machine at correct temperature
Fixed
- for coffee dispensing
- for hot water dispensing
- for steam dispensing
Machine in pre-heating phase for coffee,
Blinks slowly
hot water and steam dispensing.
Machine overheated; the machine cannot
dispense coffee in this mode.
Blinks quickly
The machine is being programmed
Blinks slowly
with
Machine dispensing coffee
Fixed
Control Panel
Causes
the
coffee
cup
The water must be drained out
into a recipient by turning the se-
lector clockwise to the "
until the green correct temperature
LED remains lit in a fixed manner.
The flow of water dispensed should
then be stopped.
fill
level
03 BRIEF INSTRUCTIONS
Solutions
" point,
01/09