Steam Out - Philips Saeco XSmall Service Manual

XSMALL
lev. pos. selector
L1
L2
L3
5.1.1. Draining the boiler (Steam Out)
To drain the boiler, proceed as follows:
MACHINE UNPLUGGED
- Turn the selector to the water position
machine in.
- The three LEDs light up and remain lit.
- Release the large coffee key; the LEDs will begin to blink in an anti-clockwise cycle and boiler
draining will commence (remember to place a recipient underneath the steam hose).
- When the draining process is complete, the double coffee and temperature LEDs will remain lit.
- Unplug the machine to end this procedure.
- Press on/off; the coffee maker will begin filling the circuit (red LED 3 blinks quickly).
LED
ON
ON
OFF
Blinks
ON
PRESS THE ON/OFF KEY TO ACCESS THE NEXT LEVEL UP
Blinks
PRESS THE ON/OFF KEY TO ACCESS THE NEXT LEVEL UP
Blinks
key function
brewing unit
microswitch
brewing unit
microswitch
power con-
sumption of
the unit in mA
pump opera-
tion
turbine opera-
tion
coffee pipe
operation
power con-
sumption of
the boiler
coffee grinder
operation
coffee grinder
sensor
, press and hold the large coffee key and plug the
05 SERVICE MODE
notes
Gear motor rises (brewing unit
in work position)
Gear motor falls (brewing unit
in home position)
OK
Between 200 and 300 mA
OK with unit inserted
KO
over 300 mA
Make water come out of the
steam hose
Each blink corresponds to one
turbine rotation
L1
Return to and switch the
unit to Work, return to L2
make water come out of the
dispenser
Use an ammeter to check the
power consumption is be-
tween 5.3 and 6.1 mA
Each blink corresponds to one
coffee grinder rotation
and
02/20