Carrier SmartVu 61AF 030-105 Manual page 21

5 - USER INTERFACE: MENU STRUCTURE
The Configuration menu gives access to a number of user-
modifiable parameters such as pump configuration, schedule
menu, etc. The Configuration menu is password-protected.
To access the Configuration menu, press the Main menu button
located in the upper-left part of the Home screen, and then select
Configuration Menu.
Once all the necessary modifications have been made, press the
Save button to confirm your changes or the Cancel button to exit
the screen without making modifications.
GENCONF – General Config
No. Name Status
1 ramp_sel no/yes
2 off/on_d 1 to 15
*Depends on the selected language (English by default).
PUMPCONF – Pump Configuration
No. Name Status
1 pump_seq no/yes
2 pump_per no/yes
3 pump_loc no/yes
*Depends on the selected language (English by default).
HCCONFIG – Heat/Cool Config
No. Name Status
1 hr_sel 0 to 3
2
3
-25.0 to 0.0
4 min_th
-13.0 to 32.0
-100.0 to 100.0
5 max_th
-148.0 to 212.0
-30.0 to 15.0
6 boil_th
-22.0 to 59.0
-5.0 to 21.1
7 ehs_th
23.0 to 70.0
8 ehs_back no/yes
9 ehs_pull 0 to 60
10 ehs_defr no/yes
*Depends on the selected language (English by default).
Default Unit Displayed text*
no - Ramp Loading Select
1 min Unit Off to On Delay
Default Unit Displayed text*
no - Exchanger Pump Enable
no - Pump Sticking Protection
yes - Flow Checked if Pump Off
Default Unit Displayed text*
1 - Heating Reset Select
0=None, 1=OAT
2=Delta T, 3=4-20mA
-20.0 °C
Min Heating OAT Threshld
-4.0 °F
100.0 °C
Max Heating OAT Threshld
212.0 °F
-10.0 °C
Boiler OAT Threshold
14.0 °F
5.0 °C
Elec Stage OAT Threshold
41.0 °F
no - 1 Elec Stage For Backup
0 min Electrical Pulldown Time
no - Quick EHS For Defrost
System configuration override: In some cases it is possible to
override system configuration. Note that not all parameters can
be overridden by the control.
CAUTION: Since specific units may not include additional
features, some tables may contain parameters that cannot be
configured for a given unit.
Description
Ramp loading sequence
Unit OFF to ON delay
Description
Water exchanger pump is enabled
Pump anti-sticking protection
Water flow is checked when the pump is off
Description
Heating Reset Select
0 = None, 1 = OAT
2 = Delta T (LWT-EWT)
3 = 4-20 mA control (external temperature sensor)
Minimum OAT threshold (used for unit protection control)
Maximum OAT threshold (used to define the Summer mode)
Boiler OAT threshold
Electric heating stage, OAT threshold
One electric heating stage used for back-up
Electrical pull-down time
Quick EHS for defrost enabled
21