Checking The Roll Bar; Checking The Seat Belt - Toro 25545T Operator's Manual

Checking the Roll Bar

1. Check the 4 bolts for looseness or wear. Torque the bolts to 203–223 N•m (150–165
ft•lb).
2. Inspect the roll bar for cracks, rust, or holes in the roll bar component parts.
Note:
have any doubts about the ROPS system, contact an Authorized Service Dealer.

Checking the Seat Belt

1. Check the seat belt
replace any damaged parts.
2. Ensure that the mounting bolts
belts are tight. Torque the bolts to 104–115
N•m (77–85 ft•lb).
3. Keep the seat belts clean using only soap and
water.
Maintenance: ROPS Maintenance
Age, weather, and accidents cause damage to the roll bar and ROPS parts. If you
for damage and
G428618
for the seat
G416165
Page 7–27 3467-222 A