Changing The Plow Skid Shoes - Toro 25545T Operator's Manual

Changing the Plow Blade (continued)
1. Shut off the engine.
Note:
high enough for the blade to be changed.
2. Flip the 2 circular snap rings
remove the snap-ring pin.
3. Pull the 2 pins
4. Place the new blade into the plow blade
assembly and secure it with 2 pins and 2 snap-
ring pins.

Changing the Plow Skid Shoes

1. Raise the plow about 91 cm (36 inches) off the ground.
2. Shut off the engine and remove the key.
3. Remove the bolts securing the skid shoes to
the plow.
4. Install the new skid shoes and secure them
with the previously removed hardware.
Maintenance: Plow Maintenance
Ensure that the vibratory plow is raised
out of the blade.
over and
G418318
G418319
Page 7–23 3467-222 A