Unloading The Machine - Toro 25545T Operator's Manual

Tying Down the Machine (continued)
Distance
A

Unloading the Machine

Crushing weight could cause death or serious injury. Stay away.
To help avoid injury:
• Unload the unit with the engine in low idle and the boom as low as possible.
• Unload the trailer on level ground.
• Attach the trailer to the vehicle before loading or unloading.
1. Lower the trailer ramp.
2. Remove the chains from the tie-down points.
3. Start the machine.
4. Raise the trencher boom, if attached, but keep it low.
5. Fully raise the plow blade and ensure that the plow swing lock is engaged.
6. Disengage the parking brake.
7. Slowly back the machine down the trailer or ramps.
Transport: Hauling the Machine
G418233
Metric
45.7 to 76.2 cm
WARNING
Page 6–4
US
18 to 30 inches
3467-222 A