Plow - Toro 25545T Operator's Manual

Starting and Shutting Off the Engine (continued)
Shutting Off the Machine
1. Move the machine to a level surface.
2. Engage the parking brake.
3. Lower any attachments to the ground.
4. Set all controls to N
5. Move the throttle lever to S
6. Turn the ignition key to O
Note:
turning the ignition key off. This helps cool the engine before it is stopped. In an
emergency, you can shut off the engine immediately.
Note:
7. For maintenance or long-term storage, disconnect the battery using the battery
disconnect switch.
Wait 2 minutes after shutting off the engine before disconnecting the battery.

Plow

Positioning the Machine
1. Start the engine.
2. Drive the machine to the starting point, in line with the planned path.
3. Engage the parking brake.
4. Remove the plow rotation pin and place it in the storage location.
5. Lower the plow blade to the starting point of the trench.
6. Shut off the machine.
3467-222A
.
EUTRAL
LOW
.
FF
If the engine has been working hard or is hot, let it idle for 5 minutes before
If you are leaving machine unattended, remove the key.
.
IMPORTANT
Page 5–10 Operation: During Operation