Hussmann VRL Installation & Operation Manual page 49

PN_3155541_E
REPLACING CONDENSER MOTOR
Unplug the power cord before servicing.
Parts may be ordered at Hussmann's Performance
Parts e-store:
https://parts.hussmann.com/
or
Call toll free: 855-487-7778
Required Tools:
• Screwdriver / Philips Tip
• 1/4" Allen Wrench
1. Remove product and place in a refrigerated area. Make sure the power is off to the case.
2. Make sure there is no voltage in the refrigerator. Remove rear lower panel as shown in the
illustration.
3. Slide out the condensing unit. Be careful using the condensing unit base to pull it out. Make
sure not to stress or interfere with other parts.
VRL3B1A Shown
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
REMOVE CONDENSING UNIT
STOPPER
49
A
VRL Merchandisers