Hussmann VRL Installation & Operation Manual page 44

s
44
ErvIcE
REPLACING DISPLAY LAMP
Note: This procedure applies to all VRL models
(1-door model is shown in the photos)
1. Disconnect power to the merchandiser.
Remove the screws at the top of the unit
display.
2. Remove the top panel.
Display Slides out to access Wireway
3. Remove the merchandiser's plexiglass panel.
4. Remove the cover display in order to have
access to the LED fixture harness.
5. Replace the LED with like fixture, and
re-attach connection.
6. Replace the display panel cover.
7. Return power to the merchandiser.
PN_3155541_E
SERVICE
REPLACING SHELF LAMPS
1. Disconnect power to the merchandiser. The
LED fixtures are located behind the top of the
door frame.
2. Remove the screws and disconnect the LED
fixture from the merchandiser.
3. Replace the LED with like fixture.
4. Return power to the merchandiser.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
LED Location