Table of Contents
Advertisement
I
12
nstallatIon
Begin installing shelves at the lowest row. Insert the shelf into the slots. Be sure to count the number of
slots between shelves as shown in the illustrations below. Tabs must be seated firmly into position.
•
Leave two slots between the lower shelf and the standard shelf (Detail C).
•
Leave four slots between the lower shelf and the shelf to be installed above it (Detail A).
•
The top shelf should have six slots shown above it (Detail B).
PN_3155541_E
Shelves are designed to support a maximum
load of 150 lbs. Exceeding this load can cause
damage to the shelves, case, damage to store
products, and potentially create a hazardous
condition for customers and store personnel.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
Case cross-section view shows the
recommended distance between each
shelf, allowing the proper airflow along
the cabinet.
Advertisement
Table of Contents
