Table of Contents
Advertisement
Menu Items
Menu item details
The menu will differ depending on the input mode.
The settings below are recommended settings and conforms to the "Normal Configuration" as defined in the EcoDesign
Regulation (2019/2021).
• POWER SAVE MODE: ON
• LAN PORT: OFF
• MOTION SENSOR: OFF
nPICTURE
You can move the menu screen display position each time the INFORMATION button is pressed.
PICTURE MODE
Changes the picture mode on the screen. The picture mode on the screen can also be changed using a remote control unit.
PICTURE menu settings other than "BACKLIGHT OFF" and "ADVANCED" are saved for each "PICTURE MODE".
BRIGHT
Adjusts the backlight brightness. (In PIP mode, the main side setting is reflected in the image.)
BACKLIGHT DIMMING
When set to "ON", gain compensation and backlight dimming are performed.
BACKLIGHT OFF
Turn off the backlight. The backlight will turn on when you operate the remote control unit. (See page 22.)
CONTRAST
Adjusts the difference between the bright and dark portions of the image.
BLACK LEVEL
Adjusts the entire brightness of the video signals.
TINT
Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta.
COLORS
Adjusts the color intensity.
SHARPNESS
Adjusts the sharpness of the image.
COLOR ADJUSTMENT
COLOR TEMPERATURE
THRU ..............Displays the input signal level as is.
PRESET ..........Selects the color temperature using "PRESET".
USER .............. Adjusts R-/G-/B-CONTRAST and R-/G-/B-OFFSET respectively using "USER".
PRESET
Selects the color temperature when the "COLOR TEMPERATURE" is set to "PRESET".
The setting values are shown for reference. The color temperature of the screen varies over time. This function is not
intended to keep the color temperature constant.
USER
Adjusts each item when the "COLOR TEMPERATURE" is set to "USER".
R-CONTRAST .... Adjusts bright-toned red component.
G-CONTRAST ... Adjusts bright-toned green component.
B-CONTRAST .... Adjusts bright-toned blue component.
R-OFFSET ......... Adjusts dark-toned red component.
G-OFFSET ......... Adjusts dark-toned green component.
B-OFFSET ......... Adjusts dark-toned blue component.
COPY TO USER
Copies the value of "PRESET" to the "USER" setting.
Select "ON" and then press the ENTER button.
(In the case other than white, color tone may differ from the "PRESET".)
GAMMA
Selects the gamma.
COLOR CONTROL-TINT
Adjusts color tone with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).
COLOR CONTROL-COLORS
Adjusts color vividness with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).
28
E
Advertisement
Table of Contents
