Table of Contents
Advertisement
Menu Items
Menu item details
The menu will differ depending on the input mode.
nADJUSTMENT (ANALOG1/ANALOG2)
MANUAL/AUTO
Adjusts CLOCK, PHASE, H-POS, and V-POS.
If you are using a Windows PC, use the adjustment pattern
on the supplied CD-ROM. (See page 10.)
MANUAL ..... Selects and adjusts CLOCK, PHASE, H-POS,
and V-POS.
AUTO .......... Use this automatic adjustment when you use
the PC analog RGB input terminal or PC analog
RGB input terminals (BNC) to display a PC
screen for the first time or when you change the
setting of the PC. (See page 10.)
CLOCK
Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of vertical stripes.
When using the adjustment pattern (see page 10), make
adjustments so that no vertical stripe noise appears in it.
PHASE
Adjusts sampling clock phase for applicable video.
Useful when small characters appear with low contrast and/
or there are flickers at corners.
When using the adjustment pattern (see page 10), make
adjustments so that no horizontal stripe noise appears in it.
* Adjustments to PHASE should be made only after CLOCK
has been correctly set.
H-POS
Adjust the horizontal position of the image.
V-POS
Adjust the vertical position of the image.
RESET
Pressing
resets the values of the ADJUSTMENT menu
items to the factory preset values.
6
E
nGAIN CONTROL
(DIGITAL/ANALOG1/ANALOG2)
MANUAL/AUTO (ANALOG1/ANALOG2)
Adjusts BLACK LEVEL and CONTRAST.
If you are using a Windows PC, use the adjustment pattern
on the supplied CD-ROM. (See page 10.)
MANUAL ..... Selects and adjusts BLACK LEVEL and
CONTRAST.
AUTO .......... Automatically adjusts BLACK LEVEL and
CONTRAST.
BLACK LEVEL
Adjusts the entire brightness of the video signals.
CONTRAST
Adjusts the brightness of the image.
nCOLOR CONTROL
(DIGITAL/ANALOG1/ANALOG2)
WHITE BALANCE
THRU .............. Displays the input signal level as is.
(for DIGITAL only)
PRESET ......... Selects the color temperature using PRESET.
USER .............. Used for adjusting R-CONTRAST,
G-CONTRAST, and B-CONTRAST
respectively.
PRESET
Allows selection from the preadjusted settings. (For a guide
to the color temperatures of the adjustment values, see page
8.)
R-CONTRAST
Adjusts red component when WHITE BALANCE is set to
USER.
G-CONTRAST
Adjusts green component when WHITE BALANCE is set to
USER.
B-CONTRAST
Adjusts blue component when WHITE BALANCE is set to
USER.
COPY TO USER
SET ............. Pressing
copies the value set for PRESET
to the USER setting.
GAMMA
Select a gamma value.
Advertisement
Table of Contents
